All Products

1.27*2.54mm DIP Plug Connector Four Row Foot

Shenzhen Antenk Electronics Co., Ltd. introduced a 1.27*2.54mm DIP Plug Connector Four Row Foot. The development of connector technology presents the following characteristics: high speed and digitalization of signal transmission, integration of all...

2.54MM DIP PLUG CONNECTOR (Mating Height 7.3MM Plug)

Shenzhen Antenk Electronics Co., Ltd. introduced a 2.54MM DIP PLUG CONNECTOR (MATING HEIGHT 7.3MM). Connector is an indispensable part of electronic equipment, it is blocked in the circuit or isolated circuit, set up a bridge of communication, so as...

2.00mm Pin Header Dual Row SMT Type

Antenk Electronics Co., Ltd. has introduced a 2.00mm pitch double-row single-layer plastic SMT connector with a clamping cover and no clamping cover, with and without positioning posts. In order to ensure stable and high-quality product quality, the...

2.00mm Box Header 180° H=4.8 Add Housing Connector

Shenzhen Antenk Electronics Co., Ltd. promoted a 2.00mm Box Header 180° H=4.8 Add Housing connector. Moisture resistance: Intrusion of moisture can affect the insulation properties of the joint and corrode metal parts. Constant damp heat test...

2.00mm Box Header 180° H=5.75mm Connectors

Shenzhen Antenk Electronics Co., Ltd. promoted a 2.00mm Box Header 180° H=5.75mm connector. Connector insulation resistance and electrical strength. 1. Insulation resistance is an indicator of the insulation properties between electrical connector...

2.00mm Box Header 90° H=4.8mm Connectors

Shenzhen Antenk Electronics Co., Ltd. promoted a 2.00mm Box Header 90° H=4.8mm connector. Electrical performance Connector electrical properties including contact resistance The connector produced by Shenzhen Antenk Electronics Co., Ltd. has a low...

2.00mm Box Header 90° H=6.40 Connectors

Shenzhen Antenk Electronics Co., Ltd. promoted a 2.00mm Box Header 90° H=6.40MM connector. The mechanical properties of the connector are in terms of the connection function, and the insertion force is an important mechanical property. The insertion...

2.00mm Box Header 90° H=5.75 Connectors

Shenzhen Antenk Electronics Co., Ltd. promoted a 2.00mm Box Header 90° H=5.75mm connector. Basic performance of the connector The basic performance of connectors can be divided into three categories: mechanical, electrical, and environmental....

1.27*2.54mm Box Header 180° H=10.5 Four Row Connector

China Guangdong Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27*2.54mm Box Header 180° H=10.5 Four Row DIP connector. Antenk Electronics Co., Ltd. is a professional manufacturer specializing in the design, development, production and sales of...

1.778mm Dual-in-line Socket Straight DIP Type Connector

China Shenzhen Antenk Electronics Co., Ltd. introduced a 1.78mm Dual-in-line Socket Straight DIP Type Stamped connector. Plug and socket: One of the basic concepts of connectors is that connectors come in two different formats, one for the male or...

1.0mm Board to Board male mating Height=7.65/12.65mm

Shenzhen Antenk Electronics Co., Ltd. introduced a 1.0mm Board to Board male, mating Height=7.65/12.65mm connector. Precautions when the terminal connector is packaged with SMT Considering the operation of the connector when plugging, some SMT...

1.0mm Board to Board Female mating Height=12.65~14.65mm

Shenzhen Antenk Electronics Co., Ltd. has launched a 1.0mm Board to Board, Female, mating Height=12.65~14.65mm connector. Precautions when the terminal connector is packaged with SMT Regarding the solder package of SMT products, although the molded...

0.5mm BTB connector Male with locating pegs type

Shenzhen Antenk Electronics Co., Ltd. promoted a 0.5mm Board to Board connector, Male with locating pegs type, mating Height=5.0mm connector. 1. Do not place the [Terminal Connector" and the process in-process or processed products (harness, etc.)...

0.5mm Board to Board connector mating Height=2.0mm

Shenzhen Antenk Electronics Co., Ltd. promoted a 0.5mm Board to Board connector, 30PIN Female without locating pegs Spring type, mating Height=2.0mm connector. Board-to-board connector test check: 1. The voltage applied to the board-to-board...

0.5mm Board to board connector male double groove

Shenzhen Antenk Electronics Co., Ltd. promoted a 0.5mm Board to board connector, male, double groove, mating height=3.0~6.5mm connector. Board-to-board connector failure handling, when the board-to-board connector is broken, it may be caused by...

0.5mm Board to board connector

Shenzhen Antenk Electronics Co., Ltd. promoted a 0.5mm Board to board connector, female, double groove, mating height=3.0~6.5mm connector. Plate-to-board salt spray test analysis When the salt spray resistant connector is operated in an environment...

1.27mm Pitch Box Header SMT With post

Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27mm pitch Box Header SMT With post, High Profile connector. In order to fully realize market competition, China's connector industry is operating independently in the market. In the international...

1.27mm Box Header Horizontal SMT H=5.40

According to Global Industry forecasts, driven by China and the economies of Asia, Eastern Europe and Latin America, the connector market will embrace the next five years of growth, with global connector demand reaching $60 billion in 2012....

1.27*1.27MM BOX HEADER WITH THE KEY 180°H=2.54MM

Connector hardness The ability of a material to partially resist the intrusion of a hard object into its surface is called hardness. The local resistance of solids to external objects is an indicator of the softness and hardness of various...

1.27mm Box Header SMT H=4.90 With post

Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27mm pitch Box Header SMT plastic height H=4.90 With post connector. Currently, the board-to-board connectors used on mobile phones have the following characteristics: First of all, "soft", flexible...

1.27mm Box Header SMT With or Without post

Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27mm pitch Box Header SMT plastic height H=5.70 With or Without post connector. The pitch of the connector pins is also narrower and narrower. Currently, the main focus is on 0.4mm pitch. Now JAE...

1.27mm Box Header SMT H=5.70 Add Housing

Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27mm pitch Box Header SMT plastic height H=5.70 Add Housing connector. In the consumer's demand for product thickness and feel, the ultra-thin, ultra-narrow connector puts new demands on the...

1.27mm Box Header 180° H=5.70

Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27mm pitch Box Header 180°, plastic height H=5.70mm connector. In order to design a connector that meets the functional requirements, material selection is very important, and the basis of material...

1.27mm Box Header 90° H=4.90

Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27mm pitch Box Header 90° bend, plastic height H=4.90 connector. The basic structure of the connector: Contacts are the core parts of the connector that perform electrical connections. The contact...