Home> Products> Male Pin Headers> 1.0mm Male Header

1.0mm Male Header

(Total 11 Products)

  • 1.00 mm Pin Header Dual Row Straight Type

    USD 500

    Brand:ANTENK

    Min. Order:1000 Piece/Pieces

    Model No:PHBS03-XXD-AB-XXXX

    Transportation:Ocean,Air,Express

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:2000K/month

    Place of Origin:China

    Productivity:2000K/month

    1.00mm Pitch straight needle double-row connector Specifications: Current Rating: 0.75Amp Insulation Resistance:1000M ohms min Contact Resistance: 20M ohms max Dielectric Withstanding: AC500V Operating Temperature: -65°C to +125°C Contact Material:...

  • 1.00mm male strip header Dual Row SMT Type

    USD 500

    Brand:ANTENK

    Min. Order:1000 Piece/Pieces

    Model No:PHBM02-XXD-ADW-XXXX

    Transportation:Ocean,Air,Express

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:2000K/month

    Place of Origin:China

    Productivity:2000K/month

    shenzhen Antenk electronics mainly produces connectors (slogan: pursue excellent quality, connect to the future world). 1.00mm Pitch male strip header, two-row SMT connector is to be launched below, which can be divided into guide column and no...

  • 1.00mm Pitch Dual Row Dual Plastic Straight Type

    USD 500

    Brand:ANTENK

    Min. Order:1000 Piece/Pieces

    Model No:PHBS04-XXD-ACB-XXX

    Transportation:Ocean,Air,Express

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:2000K/month

    Place of Origin:China

    Productivity:2000K/month

    1.00 mm Pitch dual row, dual plastic, straight wire connector Specifications: Current Rating: 0.75Amp Insulation Resistance: 1000M ohms min Contact Resistance: 20M ohms max Dielectric Withstanding: AC500V Operating Temperature: -65°C to +125°C...

  • 1.00mm Pitch Dual Row Dual Plastic SMT Type

    USD 500

    Brand:ANTENK

    Min. Order:1000 Piece/Pieces

    Model No:PHBM03-XXD-ACDW-XXXX

    Transportation:Ocean,Air,Express

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:2000K/month

    Place of Origin:China

    Productivity:2000K/month

    Antenk electronics in shenzhen offers a 1.00mm Pitch dual row, SMT connector with guide and no guide,Operating Temperature: -65°C to +125°C, Insulator Material:PA6T, PA9T, LCP, PIN available with tin plated, gold plated 1 u", 3 u", 5 u",10u" 15 u",...

  • 1.00 mm Pitch Dual Row Angle Type

    USD 500

    Brand:ANTENK

    Min. Order:1000 Piece/Pieces

    Model No:PHBR02-XXD-ADB-XXX

    Transportation:Ocean,Air,Express

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:2000K/month

    Place of Origin:China

    Productivity:2000K/month

    Shenzhen Antenk electronics launching a 1.00 mm Pitch, double row, right Angle connector, Operating Temperature: 65 ° C to + 125 ° C, Max poles: 2 * 2 P to 50 P, plastic conform to UL, PIN available with tin plated, gold plated 1 u ", 3 u, 5 u, u 15...

  • 1.00mm Pitch asymmetric double plastic pin 11P SMT

    USD 500

    Brand:ANTENK

    Min. Order:1000 Piece/Pieces

    Model No:PHBM04-11-G3D-116-BB25

    Transportation:Ocean,Air,Express

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:2000K/month

    Place of Origin:China

    Productivity:2000K/month

    Shenzhen Antenk electronics co., ltd. introduces a 1.00mm Pitch, Male Head, 11 PIN asymmetric SMT connector with a plastic height of 2.50mm.Plastic Material: PA6T, PA9T, lcp.contact Material:Brass;The Pin Length: 116 = 11.6 mm,This is a connector...

  • 1.00 mm Pin Header Single Row Angle Type

    USD 500

    Brand:ANTENK

    Min. Order:1000 Piece/Pieces

    Model No:PHBR01-XXS-ADB-XXX

    Transportation:Ocean,Air,Express

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:2000K/month

    Place of Origin:China

    Productivity:2000K/month

    Shenzhen Antenk mainly produces connector products, and a 1.00 pitch single-row right Angle connector will be introduced below. Its PIN PIN is 0.30*0.30mm, which conforms to UL certification. Plastic plated: PA6T, PA9T, LCP, PIN available with tin...

  • 1.00 mm Pin Header Single Row SMT

    USD 500

    Brand:ANTENK

    Min. Order:1000 Piece/Pieces

    Model No:PHBM01- XXS-AW-XXXX

    Transportation:Ocean,Air,Express

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:2000K/month

    Place of Origin:China

    Productivity:2000K/month

    1.00 mm Pitch single SMT connector, plastic height is 1.00 mm or 1.50 mm, docking A size and welding plate W size is selective, the PIN number 1 to50, the working temperature for - 65 ° C to + 125 ° C, in line with the UL certification, PIN needle...

  • 1.00mm Pitch Single Row Straight Double Plastic

    USD 500

    Brand:ANTENK

    Min. Order:1000 Piece/Pieces

    Model No:PHBS02-XXS-ACB-XXX

    Transportation:Ocean,Air,Express

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:2000K/month

    Place of Origin:China

    Productivity:2000K/month

    1.00mm Pitch, single row, dual plastic connector Specifications: Current Rating: 0.75Amp Insulation Resistance: 1000M ohms min Contact Resistance: 20M ohms max Dielectric Withstanding:AC500V Operating Temperature: -65°C to +125°C Contact Material:...

  • 1.00 mm Pin Header Single Row Straight Type

    USD 500

    Brand:ANTENK

    Min. Order:1000 Piece/Pieces

    Model No:PHBS01-XXS-AB-XXX

    Transportation:Ocean,Air,Express

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:2000K/month

    Place of Origin:China

    Productivity:2000K/month

    Specifications: Current Rating: 0.75Amp Insulation Resistance: 1000M ohms min Contact Resistance: 20M ohms max Dielectric Withstanding: AC500V Operating Temperature: -65°C to +125°C Contact Material: Brass Insulator Material: PA6T,UL 94V-0 Black

  • 1.00mm Pitch Single Row SMT Type

    Get Latest Price

    Brand:ANTENK

    Min. Order:1000 Bag/Bags

    Model No:PHBM05-XXS-AB-XXX

    Transportation:Ocean,Air

    Packaging:bag packing,Tube packing, reel packing

    Supply Ability:10000K/month

    Place of Origin:China

    Productivity:10000K/month

    Antenk electronics mainly produces connectors in shenzhen, where a 1.00mm Pitch single-row, horizontal and stick SMT connector is introduced.The products are widely, informs in displays, computer motherboards, stored program control exchangers,...

1.0mm (.039″) Pitch Pin Headers

Overview

Antenk offers a variety of high quality and competitively priced 1.0mm pitch single, dual, three, quad row pin (male) headers used in many board-to-board PCB connections, fitting small-sized, densely-packed devices.


This low-profile component is made from high-temperature thermoplastic and is offered with several means of connections and mounting styles such as through-hole (THM) or surface mount (SMT) and can be in vertical (straight), elevated or at a right angle configuration/orientation dissipating current of about 1.0 A or less.


The pin (male) header is generally mated with receptacle or stackable header connectors (female sockets). This types of pin headers are suitable for PCB board to board connection or for signal transmission application.


Applications of 1.0mm Pitch Pin Headers

Its small size is most suitable for PCB connections of small equipment and devices such as WiFi equipment, gaming consoles, measurement instruments, and other equipment in need of a special interface to become interconnected


Mount Type: Through-hole vs Surface Mount

At one side of this Pin Header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).


Through-Hole (Poke-In)

Best used for high-reliability products that require stronger connections between layers.

Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.

Useful in test and prototyping applications that sometimes require manual adjustments and replacements.

1.0mm vertical single row header, 1.0mm vertical dual row header, 1.0mm Elevated single row pin header, 1.0mm Elevated dual row pin Header, 1.0mm Right-angle single row header and 1.0mm Right-angle dual row header are some examples of Antenk products with through-hole mount type.


Surface-Mount

The most common electronic hardware requirements are SMT.

Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.

Cost of processing and handling is reduced.

SMT components can be mounted on both side of the board.

Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.

1.0mm Right-angle Dual Row pin header, 1.0mm SMT Single row pin header, 1.0mm SMT Dual row pin header and 1.0mm Elevated Dual Row Pin Header are Antenk`s SMT pin headers.

Soldering Temperature for 1.0mm Pitch Pin Headers

Soldering SMT pin header can be done at a maximum peak temperature of 260°C for maximum 60 seconds.


Pin-Type: Vertical (Straight) and Right-Angle

1.0mm pitch headers may be further classified into pin orientation as well, such as vertical or straight Male Header or right-angle male header.


Vertical or Straight Pin (Male) Header Orientation

One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or.

Right-Angle Pin (Male) Header Orientation

Parallel to the board's surface (referred to as "right-angle" pins).

Each of these pin-types have different applications that fit with their specific configuration.


Pcb Connector Stacking

Elevated Pin Header Orientation

Elevated pins aka Stacked Pins or Mezzanine are simply stacked pin headers providing an exact distance requirement between PCBs that optimizes electrical reliability and performance between PCB boards.


Profile Above PCB

This type of configuration is the most common way of connecting board-to-board by a connector. First, the stacking height is calculated from one board to another and measured from the printed circuit board face to its highest insulator point above the PCB.


Single, Dual or Multiple Number of Rows

For a 1.0mm straight or vertical Male Pin Header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3 ,4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-50 pins while for dual row, the number contacts may vary from 4-100 pins.


Pin Material

The pins of the connector have been designed with copper alloy. With customer`s demand the pins can be made gold plated.


Breakaway design

The pin headers are also equipped with a breakaway design making them fully compatible with their female receptacles.


Custom 1.0mm Pitch Pin Headers

Customizable 1.0 mm pitch pin headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.


Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.


The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.


Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.



Related Products List
Home> Products> Male Pin Headers> 1.0mm Male Header
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send