1.27mm Box Header SMT H=5.70 Add Housing

Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27mm pitch Box Header SMT plastic height H=5.70 Add Housing connector.

In the consumer's demand for product thickness and feel, the ultra-thin, ultra-narrow connector puts new demands on the electroplating process. On a product with a height of 0.6mm and a single product of less than 0.4mm, how? To ensure that the product's gold plating thickness and tinning effect do not climb tin, it becomes the most critical problem of connector miniaturization. At present, the common practice in the industry is to remove the gold plating layer by laser to block the tin-on path, thereby solving the problem of not climbing tin, but This technique has the disadvantage that when the gold is stripped, the laser also damages the nickel plating layer, thereby exposing the copper to the air, thereby corroding the rust.

product information:

1.No.of Contacts: 06P 08P 10P  14P  16P 20P 24P 26P  30P  32P 34P 40P 44P  50P  60P 64P 80P 100P

2.Connector Type: Double row.

3.Plastic High:H=5.70mm.

4.Packing:Tray / Bag / Tube / Tube+CAP / Tape&Reel / Tape&Reel+CAP.

   SPECIFICATION
Current Rating:                       1Amp
Insulation Resistance:            1000MΩ  min
Contact Resistance:               20MΩ  max
 Withstand Voltage:                500V AC/DC
Operating Temperature:         -40°C  to  +105°C
Contact Material:                    Brass
Contact Plating:                      Au or Sn Over Ni
Insulator Material:              PA6T+30%GF UL 94V-0