1.27mm Box Header 180°Plastic height H=5.4mm

Connector Thermal conductivity
       The thermal conductivity of the reactive material, defined by Fourier's law, is defined as the amount of heat transferred per unit of time through the unit heat transfer surface per unit temperature gradient (1K reduction in temperature over a length of 1 m). The unit is W/(m.k). A larger value indicates a faster heat transfer. It is related to the composition, density, water content and temperature of the material.
       A material with a high thermal conductivity is heated faster, but the heat is also fast, but the temperature rise is low. Rapid temperature climb is not the result of the connector. Copper alloys are metal materials with a high thermal conductivity, so for connectors used in high temperature environments, pay special attention to this parameter of the material.

      Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27mm pitch Box Header 180°, plastic height H=5.4mm connector.

product information:

1.No.of Contacts: 10P-100P

2.Connector Type: Double row.

3.Plastic High:H=5.40mm.

4.Packing:Tray / Bag / Tube / Tube+CAP / Tape&Reel / Tape&Reel+CAP.

   SPECIFICATION
Current Rating:            1Amp
Insulation Resistance:     1000MΩmin
Contact Resistance:        20MΩmax
Withstand Voltage          500V AC/DC
Contact Material:          Brass
Contact Plating:           Au or Sn Over Ni
Insulator Material:        PA6T+30%GF UL 94V-0
Operating Temperature:     -40°C to +105°C