1.27mm Pitch Female Header Dual Row Connector

Shenzhen Antenk promoted a 1.27mm pitch Female Header Dual Row Straight Type connector.
Female Header Connector:
1, Female Header connector according to the spacing: 0.8, 1.0, 1.27, 2.0, 2.54 spacing.
2, 1, Female Header connector according to the spacing: 0.8, 1.0, 1.27, 2.0, 2.54 spacing. According to the height of the plastic and whether it is divided by bumps, the bumps are semi-convex and fully convex.
3, according to the number of rows of pin headers: single row, double row, 3 rows, 4 rows, etc., the current maximum is only 4 rows.
4. According to whether it needs to be increased, whether it needs to be divided by positioning column, there are two kinds of positioning columns, one is the inner positioning column and the other is the ear positioning column.
The application of the motherboard: This connector is widely used in PCB circuit boards in electronics, electrical appliances, and meters.

The role of the mother-in-law: Its function is to function as a bridge between the blocked or isolated circuits in the circuit, and to undertake the task of current or signal transmission. Usually used with the motherboard to form a board-to-board connection; or used in conjunction with the electronic harness end to form a board-to-wire connection; it can also be used independently for board-to-board connection

1.No.of Contacts: 02To 100.

2.Connector Type: Dual Row.

3.Plastic High:4.30mm.(Other sizes can be selected).

4.Insulator Material : PA6T / LCP / PA9T.

5.Packing:Tray / Bag / Tube / Tube+CAP / Tape&Reel / Tape&Reel+CAP.

   SPECIFICATION
Current Rating:                       1Amp
Insulation Resistance:            1000M ohms min
Contact Resistance:               20M ohms max
Dielectric Withstanding:          AC500V
Operating Temperature:          -65°C  to  +125°C
Contact Material:                    Brass
Insulator Material:                   PA6T UL 94V-0 Black