0.5mm BTB connector Male with locating pegs type

Shenzhen Antenk Electronics Co., Ltd. promoted a 0.5mm Board to Board connector, Male with locating pegs type, mating Height=5.0mm connector.
1. Do not place the [Terminal Connector" and the process in-process or processed products (harness, etc.) in an environment with corrosive substances, corrosive gases, high temperature and humidity, or direct sunlight. Otherwise, the terminal may be corroded or molded. Insulation performance aging, etc., resulting in poor equipment operation.

2. Do not apply external force to the [terminal connector" or the process-in-process or processed product (Wire Harness, etc.), otherwise deformation and damage may occur, resulting in poor connector performance.

Product Information:

1.Series NO:0.5mm Board to Board connecter

2.mating Height:
  H=5.0mm

3.Packing
T:Tube   A:Tray
B:Bag    U:Tube+CAP
R:tape&Reel
W:tape&Reel+CAP

Electrical
Current Rating:0.5A
Voltage Rating:50V AC/DC
Contact Resistance:50milliohm Max
Insulation Resistance:100Megohm Min
Operation Temperature:-20°C  to  +105°C
Housing Material:PA9T+30%G.F(UL94V-0)
Contact Material:Phosphor Btonze
Contact plating:Au  or  Sn  over  Ni